Other Chevy 1
Kevin's 76 Camaro has a built 355ci, TH350. It has an 8.5" 10 bolt rear w/spool and 4.56 gears. He uses Cal-Tracs slapper bars on a mono leaf spring. The body is all stock except for a glass hood. Interior is all stock and no roll cage. It runs about 11.75 in the 1/4. He says, "This car is a street racer. So if anyone is in the Detroit area look for me on the MEAN streets of Detroit!!!"
Here is Nelson Belot's '61 Chevy Impala Super Sport drag car. He built the car himself. It has the complete 1961 interior, all 1961 steel, except the fiber glass trunk lid. The engine is a 542ci BBC, 1150 dominator, Eagle rotating assembly, BBC aluminum dart heads, roller rockers, cam was picked out by Scott Shafiroff. The car weighs about 3,750 lbs dry. It is nicknamed "The Flying Refrigarator" and runs high 9's.
This is Denis' 1975 Camaro. It's in Brazil, South America. It has a 350cu. engine, TH350, original Rochester 2 barrel, and it's his daily driver. In the future he will add a Holley 4 barrel, but currently it's too expensive there!
Here is Will's '68 Impala SS427. He's has owned it since 1979. This is a factory original 427-L72(425HP) car with a four speed. He put a TH400 in it so he could run it. He shifted at 6500 RPM with a stock convertor and the car ran 13.40 on Drag Radials and 4:10 gears.
This is Vincent's '69 Chevy II (Nova). It has a .030 over 350 ci. with a .488 solid roller cam, 10:1 TRW pistons, "411" heads, Edelbrock Torquer 2 intake and a Holley 720 cfm w/vacuum secondaries twisting a Saginaw 4-speed shifted by a Hurst V-Gate 2. Out back is a Chevy 12 bolt with 4.56 gears and 12.5" MT ET Streets. He added Comp Eng. 90/10 adjustable shocks up front with trick springs, Comp Eng. subframe connectors and Slide-a-Link traction bars. It has the original manual steering and manual brakes.
This is Michael's '75 Nova. It has a 350 with a 2800 stall, pretty much stock engine.
Send a picture of your Chevy to me with some information about it and I'll post it here!
usa1@iei.net